User information
Intended use
behle grab bars made of stainless steel are intended for use in bath- / washrooms and toilets and for step transitions. They serve aid and support for people with and without physical limitations.
Exclusion of liability
behle accepts no liability for personal injury, property damage or consequential damage caused by improper installation, maintenance, cleaning and use, in particular by disregarding the warnings and safety instructions in this manual.
Safety instructions
Instructions for qualified skilled personnel and the user:
- Observe the installation and operating instructions.
- Ensure that the wall structure, the installation material and the installation can permanently withstand the specified maximum working load. (maximum force applied to the wall: 1.000 N)
- Accordingly lightweight construction walls must be appropriately lined at the back.
- Only use behle fastening material
- Only install and use products in their original condition and for their intended purpose.
- Check products for damage on receipt and report defects immediately.
- Installation, maintenance, repair and care must only be carried out by qualified
skilled personnel.
The user information must be handed to the user after installation. It is available for download -on www.behle.com-.
Caution
Do not spray products with hot water over a longer periode of time, the surface can heat up and cause burns.
Cleaning
Cleaning and maintenance of the products as needed. Note the following information:
- Use a damp, soft cloth or soft sponge and mild, alcohol-based cleaning agents ≥ 70%.
- Note the manufacturer‘s instructions on the use of the product regarding to concentration, exposure time, etc.
- Do not apply cleaning product directly to the surface. Only apply with a cloth or sponge.
- Rinse with water directly after cleaning.
- Test the cleaning product on an inconspicuous area before use
- All abrasive, acidic, chlorinated and solvent-based products are unsuitable for cleaning.
- Do not use scouring pads or steel wool.
Maintenance
Caution
Functional defects and damage to the product can cause injuries.
For proper function and possible damage, the user must ensure a regularly inspection of the product at intervals of 6 months.
In terms of maintenance, the following information must be noted in particular:
- Faultless function of the product and of single components (e.g. adjustable braking of hinged support rail, …)
- Fastening of the product to the wall
- Condition of the wall
Any defects identifi ed must be rectifi ed immediately. It is essential to involve suitable skilled personnel.
If it is not possible to rectify the defect, the product must no longer be used.
Service life
The expected service life of the product is 10 years. Intended use and full compliance with this information are assumed.
Biocompatibility
The biocompatibility of the products has been tested and confi rmed by an independent laboratory in accordance with EN ISO 10993-5:2009.
Disposal
The product and its individual components as well as the packaging can be disposed of in accordance with existing regulations.
Technical support
via service telephone 0049 5691 6282-0.